Unit Mount; Operation - Fermvision FVP-2020IP User Manual

5.3 Unit mount

Angle bracket mount
2) Mark and drill two halls in the wall.
3) Take two wall anchors from the kit and hammer them into the drilled halls.
4) Fix the angle bracket on the wall by the screws from the kit.
the bottom side.
Surface mount
2) Mark and drill four halls in the wall.
3) Take four nuts from the kit and hammer them into the drilled halls.
4) Fix surface mount bracket on the wall by four screws from the kit.
the bottom side.
11
FERMVISION

5.4 Operation

Main bar
fermaxausIP fermaxausIP
Tap on the device
image to start
Door unlock
(Default password:
Tap on settings icon Tap on the recycle
to enter device bin to delete
settings this device from
the account
Change default
device password
Motion detection
information
Door panel/
List of
shared
devices
Device bar
device with
monitoring
Disable
monitoring
888888)
settings
SD card
monitor
Share
other
account
Talk with
the visitor
Hang on
Change
default
unlock
password
Time sync
with mobile
device
Default
settings/
reboot
12