Summary of Contents for Fermvision FVP-2020IP
- Page 1 FERMVISION FVP-2020IP Thank you for choosing our equipment IP video doorbell User manual...
-
Page 2: Table Of Contents
FERMVISION Table of contents Attention 1. Package ......................................3 As a result of continuous upgrades and functionality improvements, technical character- 2. Speci cation ....................................3 istics of the device can be changed without any preliminary declaration. 3. Description.....................................4 This manual can contain some inaccuracy or misprint. The owner reserves the right to make corrections to the information described in the user manual and device package. -
Page 3: Package
White & green wire Speaker Orange wire Type B Rain shield mounting hole White & orange wire Connection wires color code for FVP-2020IP door station White & green Network, white & green wire Sensor type 1/4” CMOS with mechanical IR cut lter Green... -
Page 4: Download App
» boxes and press «CONFIRM» button to create new account. Yellow White & Green Green Connect to Modem/Router White & Orange Twisted pair Orange RJ-45 FVP-2020IP Video door station Type B RJ-45 White & Orange Twisted pair Orange White & Green cable pinout... - Page 5 FERMVISION 1) Use CAT5 or CAT6 cable to connect the device to the rmodem/router then power up the device; fermaxausIP fermaxausIP fermaxausIP 2) If there is no LAN cable connected to the device on boot up it will automatically go into Wireless AP mode Wireless AP mode is identi ed by 1 beep 1 blink every second.
-
Page 6: Wireless Connection
White & Orange Orange SMA plug for External external 7) Fill in device information: FVP-2020IP Wi-Fi antenna Wi-Fi antenna Video door station Device Name: any name you like; 1) Connect mobile device into the Wi-Fi network you want to connect outdoor panel;... -
Page 7: Unit Mount
FERMVISION 5.3 Unit mount 5.4 Operation Angle bracket mount Main bar Device bar 2) Mark and drill two halls in the wall. fermaxausIP fermaxausIP 3) Take two wall anchors from the kit and hammer them into the drilled halls. Share Tap on the device 4) Fix the angle bracket on the wall by the screws from the kit. -
Page 8: Noti Cation Messages
FERMVISION 5.6 Share with other devices Full screen Image quality: mode The account, device was added the first time, is master account. This account has master permissions and HD or SD can change all the settings. If several mobile phones are going to be used with the same device then Speaker volume/ account should be created on every mobile phone. - Page 9 240 Vac / +12 Vdc Black White FERMVISION Yellow White & Green Green White & Orange Exit Button Orange N/O relay with 12Vdc Lock FVP-2020IP Video door station (TNP-2013J) (E.g. FSL-310) Relay Board 12Vdc Electric Strike 12Vdc n/o relay Brown Brown Red & White...