Table of Contents
Advertisement
1) Use CAT5 or CAT6 cable to connect the device to the rmodem/router then power up the device;
2) If there is no LAN cable connected to the device on boot up it will automatically go into Wireless AP mode
Wireless AP mode is identi ed by 1 beep 1 blink every second.
3) Connect mobile device into the same local network;
4) Press «CONNECT NEW DEVICE» button, then choose «EXISTING» check box and press «CONFIRM»
button;
5) New devices search will be applied and you will see the list of the devices, connected to the local
network;
fermaxausIP
6) Select your device from the list corresponding to the device sticker or press «QR CodeScan» button and
then scan QR code on your device sticker if device UID isn't in the list;
7) Fill in device information:
Device Name: any name you like;
Password: 888888 (by default);
then press «CONFIRM» button and you will see added device on the main bar.
7
FERMVISION
FERMVISION
fermaxausIP
fermaxausIP
fermaxausIP
8
Advertisement
Table of Contents
