Connecting The Balance With A Computer Or A Printer - PCE Group AB Series User Manual

17
____________________________________________________________________________________________________________________

11. Connecting the balance with a computer or a printer

The balance may send data to a computer or a printer via RS232C interface.
RxD (receiving)
TxD (send)
mass
PCE-Group offers computer programs to cooperate with balances. Demo versions and
program descriptions are available on the website:
- RS 232C Test – free serial port testing program,
-
PCE-SB – residual program for cooperation with Microsoft EXCEL and other
Microsoft Windows applications.
Detailed information for programmers:
The balance sends data with a following method:
→
Balance: initiation signal S I CR LF (53h 49h 0Dh 0Ah),
Computer
→
Balance Computer: weighing result in the following format:
(16Bytes, LONG protocol - 8bits, 1stop, no parity, 4800bps),
Bytes description:
1 - „-„ mark or space
2 - space
3 4 - digit or space
5÷9 - digit, decimal point or space
10 - digit
11 - space
12 - k, l, c, p or space
13 - g, b, t, c or %
14 - space
15 - CR
16 - LF
USER MANUAL
When cooperating with a computer, the
balance sends weighing result after initialising
signal from a computer or after pressing
key.
When cooperating with the balance, a
computer should be equipped with a program
that enables receiving and processing data
from the balance.
housing
w
ww.pce-group-europe.com
www.pce-group-europe.com