Quad V.24—Configuring The Traffic Cross-Connections - 4RF Aprisa XE User Manual

Quad V.24—configuring the traffic cross-connections
Once you have loaded the card details (see "Configuring the traffic cross-connections" on page
78) from both the local and remote terminals, you can configure the cross-connects for each
interface card.
1. Expand the V.24 displays, as required, by clicking the relevant
2. Select the Port Baud Rate as required.
3. Drag and drop to the required partner interface to create the V.24 data connection.
You can now either:
configure other interfaces, if required, or
save the configuration (see "Saving cross-connection configurations" on page 76), or
upload the configuration (see "Configuring the traffic cross-connections" on page 78) to the
terminals.
FXS and FXO—configuring the traffic cross-
connections
Once you have loaded the card details (see "Configuring the traffic cross-connections" on page
78) from both the local and remote terminals, you can configure the cross-connects for each
interface card.
1. On one side of the link, expand the FXS display, as required, by clicking .
Configuring the traffic cross-connections | 87
icons.