Advertisement
4
Heat Shield
Find the Heat Shield (10) and mount to the bottom of the
Sidekick Smoker with small bolt (A), small washer (B) and small
hex nut (F) (see Fig. 5). Do not over tighten the Heat Shield as
you may damage the porcelain finish (See Fig 3 or 4).
5
Vents
Using a small bolt (Part A), small washer (Part B) and small
hex nut (F) fasten the Vents (4) to the left, right and top of
the main body (See Fig 6).
6
Adjustable Feet
1. Take a magnetic leg (11) and screw a large nut (H) and
slide a large washer (D) 2" (50 mm) onto the magnetic
leg. Insert the magnetic leg (11) into the "L" shaped slot
in the bottom of the Sidekick Smoker (See Fig 7).
2. Add a large washer (D) onto the magnetic leg on the
inside of the Sidekick Smoker (See Fig 7). Hand tighten
a large nut (H) to secure to main body.
3. Repeat in the other 3 feet positions and adjust the
feet to the same height – approx. 2" (50 mm).
4. It is likely that the Adjustable Feet will have to be
lowered or heightened and moved along the "L" slot
for the Sidekick Smoker to fit properly on your side
burner.
SI D E k ic k S MOKE R
Assembly
MONTERING
8
Hide quick links:
Advertisement
