FCC Sidekick Smoker User Manual And Maintenance page 7

1
Determine Left or
Right Opening Door
Sidekick Smoker ships with a right-
hand door opening.
If you prefer a left-hand opening
door, unfasten the 2 bolts in each
of the hinges fastened to the
Sidekick Smoker main body (Part
1). The door is designed to fit
either right-handed or left-handed.
Rotate the door and reattach the
hinges to the right side of the main
body (1) (See Fig 1).
2
Mounting Heat Indicator
and Logo
1. Mount Heat Indicator (13) in the top set
of holes in the door. (See Fig 2). Tighten
with the nut supplied with the Heat
Indicator.
2. Mount Sidekick Smoker Logo (14) in the
bottom set of holes in the door. Tighten
with the logo clips (E) (See Fig 2).
3
Mounting the Door Handle
Take the Door Handle (15) and insert into door (2) (See Fig 3 or 4). Slide the door spring (I) onto the door handle
so it rests against the door bracket. Position the Door latch (16) over the door handle until it snaps into place as
shown in Fig 3. Add a medium washer (C) before tightening with the Hex Nut (G). Ensure that the Door latch is
in the position to lock the door when the Door Handle is at the "resting position" (see Fig 3 or 4).
Assembly
MONTERING
The
7