Introduction
The NLS-EM50S-10/NLS-EM50S-20 OEM scan engines (hereinafter referred to as "the EM50S " or "the engine") are
armed with CMOS image capturer and the Newland patented
featuring fast scanning and accurate decoding on barcodes on virtually any medium-paper, magnetic card, mobile phones
and LCD displays. The EM50S can be easily integrated into OEM equipment or systems, such as handheld, portable, or
stationary barcode scanners. The EM50S offers fully open image acquisition interface, raw data interface and I/O interface,
which enable users to easily develop their own applications with Newland's SDK.
※ Note: This guide provides general instructions for the installation of the engine into a customer's device. Fujian Newland
Auto-ID Tech. Co., Ltd. recommends an opto-mechanical engineer should conduct an opto-mechanical analysis before
integration.
Chapter Description
Chapter 1, Getting Started
Chapter 2, Installation
Chapter 3, Electrical Specifications
Chapter 4, Interfaces
Chapter 5, Auxiliary Tools
Explanation of Symbols
•
This symbol indicates lists of required steps.
※ This symbol indicates something important to the readers. Failure to read the notice will not lead to harm to the reader,
device or data.
△
!
This symbol indicates caution that, if ignored, may cause data or device damage or even personal injury.
1
About This Guide
Gives a general description of the EM50S.
Describes how to install the engine, including installation information, housing
design, optical, grounding, ESD, and environmental considerations.
Includes the electrical characteristics for the engine and timing sequences.
Includes interface pinout and connector/cable specifications.
Introduces useful tools you can use to test and evaluate the EM50S as well as
conduct secondary development.
, a computerized image recognition system-on-chip,
TM