Crawl Distance - Lazer Safe LZS-003-HS Operation Manual

LS-CS-M0005-EN
Figure 7-17: Mute Stop button functionality - option 3
7 . 7 C r a w l D i s
7 . 7 C r a w l D i s
This parameter allows to you to select the Crawl Distance (in mm, using two digits).
Caution:
This parameter is set by your supplier and should only be changed by trained
personnel. An incorrect crawl distance setting will result in speed errors being
detected by the LZS-003-HS controller which will prevent normal operation of the
press brake.
On entering this parameter's menu, the display shows:
Figure 7-18: Set crawl distance
The default setting is 5mm for dual laser systems.
To enter a new crawl distance:
1. Press the Field Muted button to increment the current digit (highlighted with an
underscore) or press the Guard Mode button to decrement it.
2. When the correct value for that digit is displayed, press the Mute Stop button to select the
next digit, and repeat Step 1.
3. Press the SET button to accept the value entered. The display returns to the main
Parameter Programming menu.
Version 1.11
t a n c e
t a n c e
LZS-003-HS Operation Manual – Dual Laser Version
Released: 03/12/2007
Page 38