Lazer Safe LZS-003-HS Operation Manual page 21

LS-CS-M0005-EN
If the start-up test generates an error, the display will show the following:
Figure 5-5: Error detected display.
(Note: the first line of the text display scrolls the message "Error detected,
emergency stop activated".)
In this situation, the press brake is shut down and cannot be operated until the error condition
is corrected. The error code is displayed on the LZS-003-HS Controller's two digit display -
consult Section 8 for detailed information.
Version 1.11
LZS-003-HS Operation Manual – Dual Laser Version
Released: 03/12/2007
Page 15