Lazer Safe LZS-003-HS Operation Manual page 24

LS-CS-M0005-EN
Press the SET button to confirm. The Ready to Set LED will be off and the Mute Set LED will
be on. The display will show:
Figure 5-9: Mute point set
The mute point is now set.
The beam may now be driven further down, or retracted.
Note:
Retraction may occur automatically after the punch has been moved downwards, to
the bottom dead centre.
The system may now be operated.
Version 1.11
LZS-003-HS Operation Manual – Dual Laser Version
Released: 03/12/2007
Page 18