Daikin EKHBHE008BA3V3 Operation Manual page 13

Programming space heating or space cooling
5 sec
EKHBH/XE008BA
Indoor unit for air to water heat pump system and options
4PW56302-1
Programming space heating or space cooling is carried out as
follows:
NOTE
1
2
3
4
5
6
7
8
9
10 Use the < button to select action number 2.
11 Use the pi and pj buttons to set the action time to 4:00.
12 Use the ba buttons to select what the unit should do from 4:00
13 Press the < button for 5 seconds to store the programmed
14 Repeat this sequence for all the days of the week.
Now, the unit is programmed to stop space heating/cooling between
2:00 and 4:00. The unit will start space heating/cooling from 4:00 if
this is programmed (see step 12).
NOTE
5 sec
Returning to previous steps in the programming
procedure without saving modified settings is done by
pressing the pr button.
Use the = button to select the heating/cooling operation
mode.
Press the < button.
The actual mode is blinking.
Press the < button to confirm the selected mode.
The actual day is blinking.
Use the pi and pj buttons until "1" (monday) is
blinking.
Press the < button to confirm the selected day.
The first programmed action of the selected day appears.
Press the < button for 5 seconds to enter the programming
mode.
Use the < button to select the action number 1.
Use the pi and pj buttons to set the correct action time
to 2:00.
Use the ba button to select x as action.
onwards.
9: set the tempearature by means of the bi and
-
bj buttons.
a: to select automatic temperature calculation (only in
-
heating mode)
actions.
You automatically return to step 4.
By pressing the pr button several times, you return to previous
steps in the procedure and finally return to normal operation.
Other actions can also be programmed for times
during the day. See operation manual on how to
program other actions.
Operation manual
12