Sonos Playbar Product Manual page 20

18
Select the room the surround speakers are associated with. The room name appears as Room (+LS+RS)
2.
on the Room Settings menu.
Select Remove Surrounds.
3.
Select Next to drop the surround sound speakers from your surround system. If these were newly
4.
purchased speakers they will appear as Unused on the Rooms menu. If these speakers existed in your
household previously, they revert back to their previous state.
You can now move them to another room for individual use.
Changing the surround settings
The default setting is determined by the calibration process. If you wish to make a change, you can follow the
steps below.
From the Settings menu, select Room Settings.
1.
Select the room the PLAYBAR and surround speakers are located in. It appears as Room (+LS+RS) on the
2.
Room Settings menu.
Select Advanced Audio -> Surround Settings.
3.
Choose one of the following:
4.
• Surrounds: Choose On or Off to turn the sound from the surround speakers on and off.
• TV Level: Drag your finger across the slider to increase or decrease the volume of the surround speakers
for playing TV audio.
• Music Level: Drag your finger across the slider to increase or decrease the volume of the surround
speakers for playing music.
• Music Playback: Choose Ambient (default; subtle, ambient sound) or Full (enables louder, full range
sound). This setting applies only to music playback, not TV audio.
• Balance Surround Speakers (iOS): Select Balance Surround Speakers and follow the prompts to
manually balance your surround speaker levels.
Using the Sonos app on a Mac or PC
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
Choose the room the PLAYBAR is located in from the Room Settings for drop-down list.
3.
From the Basic tab, select Add Surrounds.
4.
Follow the prompts to add first a left and then a right surround speaker.
5.
Removing surround speakers
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
Choose the room the PLAYBAR is located in from the Room Settings for drop-down list. The room name
3.
appears as Room (+LS+RS).
From the Basic tab, click Remove Surrounds. If these were newly purchased speakers, they will appear
4.
as Unused in the Rooms pane. If these speakers existed in your household previously, they revert back to
their previous state.
Changing the surround settings
The default setting is determined by the calibration process. If you wish to make a change, you can follow the
steps below.
Product Guide