Sonos Play:3 Product Manual
Hide thumbs Also See for Play:3:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Sonos Play:3

  • Page 2 Sonos, Inc. Sonos and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos, Inc. Sonos Reg. U.S. Pat. & Tm. Off.
  • Page 3 Sonos Play:3 The Play:3 is the most versatile Sonos wireless speaker that lets you use any Sonos app to control and enjoy all the music you want all over your home (see Explore Play:3 for more information). • Three custom-designed drivers (two mid-range and one tweeter), each with a dedicated amplifier.
  • Page 4: Select A Location

    (audio equalization) will automatically adjust to create the best possible sound when the orientation is changed. • The Play:3 is designed to work well even when placed next to a wall or other surface. For optimum performance, maintaining more than 1” (2.5 cm) clearance around the back of the unit is recommended.
  • Page 5: Status Light

    Press three times to skip to the previous track. • Press and hold to add the music playing in another room. Note: You can’t skip or go to the previous track when listening to radio stations. Status light Speaker status For more information, see http://faq.sonos.com/led.
  • Page 6: Connector Panel

    • Music library. Play music stored on your computer or any Network-Attached Storage (NAS) device. For a full list of the music choices available in your country, go to www.sonos.com/music. For more information about playing music, check out our mobile app product guide at www.sonos.com/guides.
  • Page 7: Tune Your Room With Trueplay

    Stereo pairs You can pair two Sonos speakers in the same room to create a wider stereo experience. One speaker serves as the left channel and one serves as the right channel.
  • Page 8: Create A Stereo Pair

    On a computer: Choose one of the following: • On a PC, go to Manage > Settings. • On a Mac, go to Sonos > Preferences > Room Settings. Choose a speaker from the Room Settings drop-down list. Click Create Stereo Pair.
  • Page 9: Surround Speakers

    On the Basic tab, click Separate Stereo Pair. Surround speakers Turn two Sonos speakers (same model) into separate right and left channels for your home theater. If you create a room group or stereo pair instead, you won’t have surround sound.
  • Page 10: Your Home Network

    Select the Surrounds tab and change the settings Remove surrounds If the speakers were part of your Sonos system before you added them as surrounds, they’ll revert back to their previous room names. Otherwise, they’ll appear as Unused in Rooms.
  • Page 11: Got A New Router

    Sonos Play:3 Got a new router? If you purchase a new router or change your internet service provider (ISP), you’ll need to restart your Sonos products after the router is installed. If you keep a Sonos product connected to your router and an ISP technician connects it to the new Note: router, then you’ll only need to restart your other Sonos products.
  • Page 12: Important Safety Information

    Product Guide Important safety information Warning: Do not open Sonos products as there is a risk of electric shock. Under no circumstances should Sonos products be repaired by anyone other than an authorized Sonos repair center, as this will invalidate the warranty.
  • Page 13: Specifications

    One rear firing bass radiator with a 60 sq. cm surface area Stereo Pair setting Allows you to group two Play:3's in the same room with one Play:3 serving as the left channel and the other as the right channel.
  • Page 14: Product Guide Feedback

    We’d love to hear from you! We’ll read your feedback carefully and use it to help us improve our product guides. Write to us at: docfeedback@sonos.com If you’re having a problem with your Sonos system, please contact Customer Care so they can help. Email them at http://www.sonos.com/emailsupport.

Table of Contents