Step 3. Testing The Scanner - Plustek SecureScan X50 User Manual

4. Follow the on-screen instructions to install all software that your new scanner
requires. If the pop-up wizard window appears click Next, and click Install this
driver software anyway in the Windows Security window then click Finish in the
wizard window.
5. After the software is installed, close all open applications and click the Finish
button to restart your computer.
Attention
S t e p 3 . T e s t i n g
S t e p 3 . T e s t i n g
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Double-click the
window.
2. Select the correct Model name from the drop-down list. Choose the alignment
method Left-aligned. Select Recognition from the Application drop-down
list to scan image and recognize document data. Click the OK button to
complete the settings.
3. Open the cover and place the passport or ID card face-down on the scanner
glass. Align the passport or ID card along with the alignment bar. Gently close
the cover.
4. The scanner starts to scan immediately. After the scanning process is
completed, the scanner will beep once and the scan indicator will blink once.
The scanned image will display on the screen.
Save the Setup/Application CD in case you need
to reinstall the driver and software in the future.
t h e S c a n n e r
t h e S c a n n e r
SecureScan icon in the system tray to display the main
13