Table of Contents
Advertisement
64 Bays SAS to SAS/SATA JBOD Subsystem
3. Push the main switch button in the front panel to power on.
Main Switch
4. Allow the machine a few moments to initialize before using it. The main switch
button will continue flashing blue until the system is finished checking each disk
slot.
NOTE: The system will initialize after turning on the Main Switch.
Each disk slot will be checked during subsystem initialization.
3.6 Powering Off
MPORTANT: When powering off the JBOD Subsystem, turn off first
the Main Switch in the front panel and allow at least 4 minutes for
the subsystem to shutdown properly. The main switch button in
the front panel will flash blue.
When JBOD Subsystem has totally powered down, turn off the
switches of the 2 Power Supply Fan Modules at the rear. The main
switch button in the front panel will still flash blue until the power
cords are pulled out from the sockets.
40
User Manual
Advertisement
Table of Contents
