Table of Contents
Advertisement
64 Bays SAS to SAS/SATA JBOD Subsystem
14. Use six (6) M5 screws to lock the enclosure into the rack post, one screw in
each corner. Note that the screw driver will need to pass through the corner
hole of front panel for the two upper corner holes on both sides.
Corner
Hole
Screw
Front Left Side
Front Right Side
15. Open the top cover and re-insert the disk drives / disk trays, if disk drives/disk
trays were previously removed. Then close the top cover.
User Manual
35
Advertisement
Table of Contents
