Table of Contents
Advertisement
4
Attach the power cord to the CRX1600L.
5
Attach the i.LINK cable to the drive's interface connector.
6
Power on the CRX1600L.
7
Power on the PC if it was shut down.
8
Install the software and load the drivers as instructed by the
software documentation (or from the Quick Start guide).
9
Restart the PC.
10
The 1600L i.LINK drive is now ready to use!
22
S 4 0 0
S 4 0 0
S 4 0 0
S 4 0 0
Advertisement
Table of Contents
