Setting Up Your Printer; Unboxing - Uniz Slash OL User Manual

SETTING UP YOUR
B
PRINTER

UNBOXING

The SLASH comes in reusable, durable packaging that has been specially designed to protect your
SLASH in transport. To properly unpack your SLASH, please follow the steps described below.
START UNBOXING
Start unpacking by correctly orienting the cardboard box, then slide the foam packaging out of the
box by pulling the cardboard handle beneath the printer while holding the box.
OPEN IT UP
On the foam packaging, you will find the Quick Start Guide and accessories.
REMOVE THE FOAM PACKAGING
In the foam part on top of your SLASH, you will find all accessories of your SLASH. Take these out
and put them aside. Open up the package by removing the foam wrap at the middle. Now you can
take out the SLASH and place it on your desk. Make sure you hold the SLASH by the aluminium
casing while carrying it.
REMOVING PROTECTION
There is some packaging material around the machine. You may remove it.Then, your SLASH is
ready for use!
UNBOXING
02