Uniz Slash OL User Manual page 42

the right place
bottle has not
d
ooling system
rm and the LCD
Solutions
Clean up the residual resin according to the
guidance and replace with a new resin bottle,
make sure the bottle is inserted all the way in
Pierce either top hole of the resin bottle with the
provided awl
Replace with new tape, cut and cover any exposed
area
Adjust the tightness of the lead screw nut and the
build platform holder according to the guide
Replace with new LCD cooling module or return to
the factory for repair.
Adjust the build platform parallelism according to
the tutorial video
39