Table of Contents
Advertisement
Case 3: Network connector of computer is free (system environments E, F)
To NETWORK
connector
Computer
Note
When connecting the Network Media Receiver and the computer as shown above, the following settings
must be configured:
• Assign a fixed IP address to the computer (this page).
• Select an IP address allocation method for the Network Media Receiver (page 33).
Assigning a fixed IP address to the computer
When the Network Media Receiver is connected via a network cable in one of the system
environments listed below, a fixed IP address must be assigned to the computer.
• E, F (page 24)
• G (page 24) without router with built-in hub
Note
Do not use this system configuration if the system environment includes a router (or a router with built-in
hub).
1
On the computer, click "Start" on the Windows taskbar, and click "My
Computer" to display the "My Computer" window.
2
Click "More" and "My Network Places".
The "My Network Places" window appears.
3
Click "Show Network Connections".
The "Network Connections" window appears.
4
Right-click "Local Area Connection", and click "Properties".
The "Local Area Connection Properties" window appears.
Crossover cable (supplied)
To NETWORK
connector
Network Media Receiver
27
Advertisement
Table of Contents
