Cautions For Use - REDT R&D MAGIC-70 Manual

Cautions for Use

Please be sure to read and follow the instructions below for safety use.
 The instructions below are intended to prevent personal injury and property damages.
 Please read carefully and use the machine properly.
If you don't follow these instructions, injury or property damage may occur.
If you don't follow these instructions, users may be seriously injured.
 Cautions related to power
Do not use damaged cord or
loosened outlet.
 It may cause electric shock or
fire.
Do not pull a plug by the cord. Do
not touch a power plug with wet
hands.
If smoke comes out from the
engraver during use, turn off the
engraver immediately and call the
sales agency or our service
center.
 Cautions related to use
Do not use this machine in a place
with oil, smoke, humidity, dust or
water.
 It may cause electric shock or
fire.
Be sure to use the engraver body
only on a stable level surface.
 The engraver weights about 28kg,
and it vibrates left and right
during operation. Therefore, if you
use this machine on an uneven
surface, it may cause damage to
the surface and products, and
injury to users.
Do not put multiple power plugs
into one outlet simultaneously. It
may cause fire due to overheated
outlet.
If you are not going use this
product for a long time, pull out
the power plug.
Do not put a candle or cigarette
butt on the engraver. Avoid any
heating apparatus like heater when
using this machine.
 It may cause failure or fire due
to overheating.
3