Sony PCWA-C500 Operating Instructions Manual page 33

5
Confirm your settings, then click Next.
The Connected with access point panel appears when communication
with the Access Point is established. (It may take some time before a
connection is established.)
Note
If an error message is displayed, the settings are not correct. Read the error message
carefully, and click Back to correct the settings.
6
When the Access Point settings are complete:
1 Uncheck the Change access point settings check box, and click Next.
2 Click Finish when the Completing the Wireless Connection Easy
Setup Wizard panel appears.
This completes all the necessary basic configuration for connecting to
a wireless network access point. When you want to change the Access
Point settings, follow the instructions below.
If you change the Access Point settings:
Note
To use an Access Point to connect to the Internet, you must change the Access Point
factory default settings.
1 Check the Change access point settings check box, and click Next.
2 Click Access Point Setup on the panel that is displayed.
Your web browser starts and displays the Access Point setup page.
33