Sony PCWA-C500 Operating Instructions Manual page 17

• Double-clicking Network adapters does not display the Sony 802.11a Wireless
LAN Adapter.
c Remove the Wireless LAN PC Card from the computer, and reinsert it. Then,
reinstall the Wireless LAN PC Card driver.
• Double-clicking Other devices displays the Sony 802.11a Wireless LAN Adapter.
c Click Sony 802.11a Wireless LAN Adapter, and click Remove to uninstall the
Wireless LAN PC Card driver. Then, reinstall the Wireless LAN PC Card
driver.
7
Confirm that the message "This device is working properly"
is displayed under Device status.
Note
If the message "This device is working properly" is not displayed, the Wireless LAN
PC Card is not working properly. In this case, repeat steps 1 to 5, and click Sony
802.11a Wireless LAN Adapter. Then click Remove to uninstall the Wireless LAN
PC Card driver. Next, restart the computer, and reinstall the Wireless LAN PC Card
driver.
8
Click OK.
You are returned to the System Properties dialog box.
9
Click OK to close the System Properties dialog box.
You are returned to the Control Panel.
10
Click to close the Control Panel.
The Control Panel closes.
When using a computer with an Ethernet interface other than a Wireless
LAN PC Card, it is recommended that you disable the Ethernet interface to
avoid any unexpected difficulties. After completing all of the above steps,
perform the following steps:
1
From the Start menu, point to Settings, then select Control
Panel.
The Control Panel appears.
2
Double-click System.
z
Hint
If the System icon is not displayed, click "view all Control Panel options".
17