Telemyo Dts Specifications - Noraxon TeleMyo DTS Operating Document

PC-POD-FA-001-v02

2.1 TeleMyo DTS Specifications

Power Requirements
• Replaceable Li-ion rechargeable battery, operation time more than 8 hours after fully
charged
Belt Receiver Output & Transmission Frequency (Depending on country)
• Up to 100 mW (depending on antenna and country allowance)
• WiFi DSSS 2412-2464 MHz on (up to) 11 selectable radio channels
• Belt Receiver Re-Transmission range: up to 100 meters in line-of-sight recordings
DTS Probe Output & Transmission Frequency
• Transmission range: 10m
• Output power: 4mW
• DSSS 2400-2472 MHz on 5 selectable radio channels
EMG Sensor Data Acquisition System
• 16-bit resolution
• Sample rates 1,500 (for 16-channels)
• Selectable low pass filter 500, 1000, 1500 Hz
EMG Sensor Preamplifiers
• No notch (50/60 Hz) filters are used
• 1st order high-pass filters set to 10 Hz +/-10% cutoff
• Baseline noise < 1 uV RMS
• Input impedance > 100 Mohm
• CMR > 100 dB
• Input range +/- 3.5 mV
• Base gain 400
• Snap-style or Pinch-style terminal electrode connections
• Rechargeable Lithium Polymer battery
Dimensions
• EMG Probes Dimensions: 1.34" L x 0.95" W x 0.55" H (3.4 cm x 2.4 cm x 1.4 cm)
• EMG Probes: Weight: Less than 14 g.
• DTS Belt Receiver Dimensions: 12.6 cm L x 6.75 cm W x 2.38 cm H
• DTS Belt Receiver Weight: Less than 185 g.
PC-POD-FA-001-v02 Printed copies are not controlled. Page 5 of 20