Dis-Ccu Hardware Description - Shure DDS 5900 Manual

Digital discussion system

Hide thumbs Also See for DDS 5900:

Table of Contents

DDS 5900 Digital Discussion System

DIS-CCU Hardware Description

DIS-CCU Central Unit

Front Panel

① Menu display

② Navigation Buttons

③ Power Button

Back Panel

④ Power Supply Con-

nector

⑤ DCS-LAN Outputs

⑥ Control Connector

(TCP/IP)

A 2x20 character OLED-display enables system configuration without a computer.

5-button keypad for configuring the system without a computer.

The power button turns on or off the central unit. All connected DCS-LAN units and

power supplies will automatically power on or off with the CCU.

• Green = powered on

• Red = powered off but connected to power supply

• Off = no power supply is connected to the CCU

Note: System settings are stored and persist through a power cycle.

Threaded connector secures to the PS-CCU power supply.

Four RJ45 jacks are available for connecting the microphone units, forming the

DCS-LAN. The DCS-LAN chain safely carries digital audio, control data, and pow-

er over the same cable. Use any or all of the four outputs for a variety of layout

configurations.

Important: Only connect DCS-LAN equipment to this output.

The RJ45 connector allows access to the built-in web application from a computer,

or for connection to a control system like AMX or Crestron .

Shure Incorporated

6/96

Table of Contents