R2T-F Operation Method 2; Ttl/M Mode - FlashPoint R2 Manual

R2T-F Operation Method 2

TTL/M Mode

Button
CH/ OK
GR
MODE
Select Dial
18
Operation
Short press
Double-click
Long press for 2 seconds
Long press for 5 seconds
Short press
Long press for 2 seconds
Short press
Status
Normal
Set the channel
Set the group
Function
(under normal status) Enter CH settings;
(under settings) Confirm and back to normal status
Control the ON/OFF of modeling flash
Enter C.Fn custom settings
Switch the Operation Methods (Method 1/Method 2)
Set POWER/FEC amount
Select all the group
(under normal status) Switch the <
(TTL/M/OFF)
Function
Set < Group>
Set the channel amount
Adjust the group's POWER/FEC amount
Group>mode