Transmitter Setup; Fujifilm Menu System Flash Mode Setting - FlashPoint R2 Manual

1. Press the <CH/OK>
2. Select the custom function number (No).
• Turn the Select Dial to choose the Custom Function No.
3. Change the Setting.
• Press the <GR>
• Turn the Select Dial to set the desired number. Pressing
confirm the settings.
• Press <MODE>

Transmitter Setup

• SETTING THE CAMERA
To trigger the R2T-F,
please set camera's flash mode to TTL flash.

Fujifilm menu system flash mode setting:

Button for 2 seconds or longer until <Fn> is displayed.
Button until the custom function No. blinks.
button to exit the C.Fn settings.
<GR> button will
13