Using Smartshare - LG P725 User Manual

Connectivity
1
Select a network under
2 Enter a password for the network (if
necessary).
3 Connect.
Select
Add a WLAN manually
1
In Idle mode, open the application list
and select Settings > Wireless &
networks > Wi-Fi settings > Add
Wi-Fi network.
2
Enter the SSID for the network and
select the security type.
3
Set the security settings depending on
the selected security type.
4 Save.
Select
Connect to a WLAN using a Wi-Fi
Protected Setup (WPS)
Using WPS, you can connect to a secured
network.
To connect to a WLAN with a WPS button,
1 In Idle mode, open the application list
and select Settings > Wireless &
networks > Wi-Fi settings.
2 WPS push button request.
Select
3 Press a WPS button on the access point
within 2 minutes.
To connect to a WLAN with a WPS button,
1 In Idle mode, open the application list
and select Settings > Wireless &
56
Wi-Fi networks. networks > Wi-Fi settings.
2 Select a network indicated by the WPS
icon and select WPS PIN.
3
On the access point, enter the PIN and
press the start button.

Using SmartShare

SmartShare uses DLNA (Digital Living
Network Alliance) technology to share digital
content through a wireless network.
Both devices must be DLNA certified to
support this feature.
To turn SmartShare on and allow sharing
contents
1 Applications tab
Touch
SmartShare.
2 Menu key and select
Press the
Settings.
3 Always accept request if you
Touch
would like to automatically accept
sharing requests from other devices.
4 Receive files if you would like to
Touch
automatically allow upload files to my
phone from other devices.
5 Touch Discoverable checkbox to turn
on.
and select