Access Codes - LG Chocolate KU800 User Manual

Access codes

You can use the access codes described in
this section to avoid unauthorised use of
your phone. The access codes (except the
PUK and PUK2 codes) can be changed by
using the Change codes feature [Menu
#.1.4.3].
PIN code (4 to 8 digits)
The PIN (Personal Identification Number)
code protects your USIM card against
unauthorised use. The PIN code is usually
supplied with the USIM card. When the PIN
code request is set to On, your phone will
request the PIN code every time it is
switched on. When the PIN code request is
set to Off, your phone connects to the
network directly without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some USIM
cards, is required to access functions such as
Fixed dial number. These functions are only
available if supported by your USIM card.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is
required to unblock a blocked PIN code. The
PUK code may be supplied with the USIM
card. If not, contact your network operator's
customer service department for the code. If
you lose the code, contact your network
operator's customer service department.
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some USIM
cards, is required to unblock a blocked PIN2
code. If you lose the code, contact your
network operator's customer service
department.
Security code (4 to 8
digits)
The security code prevents unauthorised use
of your phone. The default security code is
set to '0000' and the security code is
required to delete all phone entries and to
restore the handset to the factory settings.
23