Objecto F3 User Manual page 11

Timer Setting - Off Timer Setting
When off timer is set, the fan will automatically stop running after
reaching the set time.
1. Press the timer button when fan is on to set the off timer
When you press the timer button on the main unit or the remote control when fan
is on, the 1H timer indicator will turn on, and the schedule off mode is enabled.
The time for schedule off (1H-4H) can be set by pressing the timer button on the
main unit or the remote control.
• Please confirm the timer display and set the time before the device stops.
• When the off timer is set, the timer display will show the remaining time before
the schedule off function starts.
* The light off mode will be canceled automatically when the off timer is enabled.
2. Cancellation of schedule off
The timer indicator will automatically turn off by simply pressing the timer button
on the main unit or the remote control several times.
Timer Setting - On Timer Setting
When on timer is set, the fan will automatically start running after
reaching the set time.
Attention
Do not use the on time where there are children or where strong wind may
cause the device to tip over.
1. Press the timer button to set the on timer when the fan is off
If you press the timer button on the main unit or the remote control when the fan
is off, the timer indicator will start fl ashing, indicating that the schedule on mode is
enabled.
• The indicator for the last air volume (including the swing indicator) also flashes.
("Memory function" → see page 7)
You can simply press the
set the time to start the schedule on function.
• When the on timer is set, the timer display will show the remaining time before
the schedule on function starts.
timer button on the main unit or the remote control to
11
English