Network Settings [Menu 7-6]; Reset Settings [Menu 7-7]; Gprs Settings [Menu 7-8] - LG C3380 User Manual

Network settings [Menu 7-6]

You can select a network which will be registered either
automatically or manually. Usually, the network selection
is set to Automatic.
Automatic [Menu 7-6-1]
If you select Automatic mode, the phone will automatically
search for and select a network for you. Once you have
selected "Automatic", the phone will be set to
"Automatic" even though the power is off and on.
Manual [Menu 7-6-2]
The phone will find the list of available networks and
show you them. Then you can select the network which
you want to use if this network has a roaming agreement
with your home network operator. The phone let you
select another network if the phone fails to access the
selected network.
Preferred [Menu 7-6-3]
You can set a list of preferred networks and the phone
attempts to register with first, before attempting to
register to any other networks. This list is set from the
phone's predefined list of known networks.

Reset settings [Menu 7-7]

You can initialize all factory defaults. You need Security
code to activate this function.

GPRS settings [Menu 7-8]

GPRS (General Packet Radio Service) is a technology that
allows mobile phones to be used for sending and
receiving data over the mobile network. GPRS is a data
bearer that enables wireless access to data network such
as the Internet.
Before you can use GPRS technology
- You need to subscribe to the GPRS service. For
availability and subscription to GPRS service, contact
your network operator or service provider.
- You need to save the GPRS settings for the applications
used over GPRS.
Power on [Menu 7-8-1]
If you select Power on and you are in a network that
supports GPRS, the phone registers to the GPRS network
and sending short messages will be done via GPRS. Also,
starting an active packet data connection, for example, to
send and receive e-mail, is quicker.
55
C3380