Paso PAW5500-VES Series User Manual page 22

EN
D) Rack confi guration
In the CONFIGURATION menu, browse through the items and select 'set>RACK CONFIG'.
From here it is possible to confi gure all the basic settings of the system.
D1) >> System
D2) >> Emergency units
Set unit with keys Confi guration of the keys of the stations
In an emergency system with PAW5500-VES control units, it is possible to connect up to four remote emergency units:
click on 'Change' to set the unit type:
1 key unit = single zone unit (PMB132-V)
12 key unit = 12-zone unit (PMB132/12-V)
Then press 'Edit Key' to confi gure each key (see Emergency units on page 38).
By pressing 'Set unit with touch screen', the screen page on which it is possible to confi rm the presence or otherwise of
TSB8500-V stations connected to the PAW will appear.
PAW5500-VES Compact systems
PAW5500-VES
On the 'System confi guration' screen page, use the [ + ] and [ – ] keys to set the
following:
Rack address: ID address of the PAW (from 0 to 5).
System racks: number of PAWs present in the system (6 at most).
Spare amplifi ers: standby amplifi er (add or remove).
The item 'Rack amplifi ers' automatically shows the number of amplifi ers present in
the system.
On the 'Emerg. unit model' screen page, use the sub-menus to set the
confi guration of the emergency units.
22 System manual