Table of Contents
Advertisement
3.
To cancel the repeat function, press the REPEAT Button repeatedly until all the
repeat indicators disappear on the display.
Programmed Playback:
Up to 20 tracks can be programmed playback as follows:
1.
In CD stop playing mode, press the PROG (Program) Button. "PROG 01" will
appear on the display and PROG indicator will blink.
2.
Select the first specific track to be programmed by pressing the
Forward) or
repeatedly.
3.
Press the PROG Button again to store the selected track into the memory.
4.
Repeat steps 2 and 3 until all the specific tracks stored into the memory.
5.
Press the
Play/Pause Button on the unit or Remote Control to start program
playback.
6.
To stop press the ■(Stop) Button on the unit or Remote Contronl once. "PROG"
indicator will remain on the display. Then press the
playback again.
7.
To stop and cancel the program, press the ■ (Stop) Button on the unit or
Remote Control twice. "PROG" indicator on the display will disappear.
LINE (AUX) IN:
1.
Connect the external Audio Device with a 3.5mm AUX cable. (Cable not
included).
2.
Insert one end of the AUX cable to the Phone; Line Out or AUX Out Jack on the
external Audio player.
3.
Power on the unit from Standby mode by press the POWER Button on the unit.
Insert the other end of the AUX cable into the LINE IN Jack on the rear of unit.
The unit will enter to the LINE IN mode automatically. "AU" indicator will appear
on the display.
4.
Play the music on the connected Player as usual. (Make sure the volume level of
the connected Audio Player is turned to high level.)
Note:
If the Aux Cable was plugged into the LINE IN Jack, the other function such like
BT; CD and Radio will be auto cut. Unplug the cable from the LINE IN Jack before use
IN Jack before use other functions.
(Previous/Skip Backward) Buttons on the unit or Remote Control
Button to start program
17
(Next/Skip
Hide quick links:
Advertisement
Table of Contents
