General Operation - Magnavox MM435 Owner's Manual

GENERAL OPERATION:

1. Connect the unit to AC power as previously instructed. The unit will enter to
standby mode automatically and the LCD Display will illuminate.
2. Press the POWER Button on the unit to turn on the unit from standby mode. The
POWER Indicator will illuminate.
3. Press the FUNCTION Button repeatedly to switch to desired playback mode.
The correspondent indicator will appear on the display with your selection (see
list below):
Playback Mode:
CD
BT (Bluetooth)
Radio FM Band
Radio AM Band
4. During playback,
Turn the VOLUME Control Knob on the unit to adjust volume level as desired.

Press the DBBS Button to turn on the

enhance the bass of the sound), the DBBS Indicator will illuminate. Press
again to turn it off.
5. Press the DIMMER Button repeatedly to set the brightness level of
display.
6. When finished listening, press the POWER Button on the unit to turn back to
standby mode.
CLOCK:
To set or reset the actual time:
In Standby mode, press and holding the TIME (Set)Button, time on display will
blinking. Then:
Press the HOUR

(Make sure the PM Indicator appearing on the display if the time is PM and
AM Indicator appearing on the display if the time is AM).
Press the MIN (Minute Set) Button on the unit to set minute.

When finished settings, release the TIME

and exit, time on display will stop blinking.
OPERATION
Indicators:
"Cd" will appear on the display
"bt" will appear on the display
"FM" will appear on the display
"AM" will appear on the display
(Set) Button on the unit to set hour.
13
Dynamic Bass Boost System (to
(Set) Button to save the settings