Magnavox MM435 Owner's Manual page 16

BT (BLUETOOTH) :
BT (Bluetooth) pairing
First time use or re-pairing the unit to a new BT Device, pair as follows:
1. Power on the unit and enter to BT mode as previously instructed. "bt" indicator
will appear on the display and blink.
2. Power on the external BT Device and enter to BT searching mode. Start pairing
following the on screen instructions from the external BT Device. After paired, the
"bt" indicator on the display will stop blinking.
3. If pairing is complete you may now play music with your external BT Device.
4. During playback:
Press the

press again to resume normal playback.
Press the

on the unit or Remote Control repeatedly to skip tracks.
Notes:
When the external BT Device searched the unit, our model number "MM435" will

appear on the display of external BT Device.
If while pairing you are asked for a code, please try "0000" or "1234".

Normal operation after pairing:
1. Turn on the BT function of the external BT Device.
2. Power on the unit and enter to BT mode as previously instructed. "bt" indicator
will appear on the display and blink.
3. Wait a few seconds until the unit is automatically paired to the external BT
Device. ("bt" indicator on the display will stop blinking).
4. After pairing is complete you may now play music with your external BT Device.
RADIO:
1. Power on the unit and enter to Radio mode as previously instructed. "AM" or "FM"
indicator and the radio frequency will appear on the display.
2. Press the AM/FM Button to select the radio band as desired.
3. Turn the TUNNING Knob to receiving the desired radio station.
4. Press the TIME-DISP (Time-Display) Button repeatedly to read the radio
frequency or actual time.
 
Play/Pause Button on the unit or Remote Control to pause,

(Next/Skip Forward) or

(Previous/Skip Backward) Buttons
15