Korg monologue Owner's Manual page 17

RING/SYNC switch
This switch turns the Oscillator sync and ring modulator on or off. When the
switch is in the center position, both the oscillator sync and the ring modulator
will be turned off.
SYNC: With this type of modulation, the phase of Oscillator 2 is forcibly syn-
chronized to the phase of Oscillator 1. This adds harmonic overtones to the
frequency of Oscillator 2, making a complex waveform.
VCO 1 Wave
Sync
VCO 2 Wave (original)
VCO 2 Wave (output)
RING: This produces a ring modulation effect. Oscillator 1 is used to ring-mod-
ulate Oscillator 2. By adjusting the PITCH knob of Oscillator 2, you can create
non-tonal metallic sounds.
VCO 1
VCO 2
SHAPE knob
This knob will determine the final shape, complexity, or duty-cycle (Square) of
the selected waveform.
0
[OFF, ON]
RING MOD
[0...1023]
1023
17