Suzuki WagonR Manual page 62

62
system either through Bluetooth or
USB.
1. Set the Smartphone Linkage mode
to *Smartplay Studio. Refer to
section "Managing Smartphone
Linkage Settings" on page
i
NOTE:
The Smartphone Linkage mode
setting is required only for
phone connected through USB.
The phone charging level may
not progress as expected
depending on the Linkage
mode functions that
activated and how often they
are used. In some cases, if
several features are activated
simultaneously, which draws a
significant amount of power, the
charge level of the phone may
even decrease.
2. Connect your phone
system:
To connect through USB, refer
to the section
USB Source" on page
30. To connect through BT, refer to
the section 5.1"Establish Con-
nection" on page
i
NOTE:
If you have
smartphones to the system one
using USB and
through BT, the smartphone
are connected using USB will be
preferred over
connected through Bluetooth.
You can access *Navigation
from the system only if your
smartphone is
through USB.
with the
"Connecting a
51.
37.
Figure 63: Smartplay Studio
connected 2 In the Home screen, the system
changes the name of the Connect
tile to Studio and also indicates
the other
whether
through USB or BT.
the phone
3. Tap . The system displays the
*Smartplay Studio Screen. You can
now access the *Navigation App
and the
connected
shortcuts to some of its functions.
SMARTPHONE LINKAGE
Screen
you have connected
*AHA App, including