Rvc Settings; Reverse Park Assist System (Rpas) - Suzuki WagonR Manual

VEHICLE INFORMATION
8.2.1 RVC S
ETTINGS
i
NOTE:
You can change the settings
only when the reverse gear is
engaged.
When in the RVC screen, if you tap the
control element, the system
displays the RVC Settings screen. The
details of the screen are as listed:
Guide Lines: Enables/disables
static guidelines.
Brightness: You can adjust the
brightness of the camera using the
Brightness settings.
brightness range is from 0 to 10.
i
NOTE:
To set value, you can also drag
the slider in the required field.
Contrast: You can adjust the
contrast of the camera using the
Contrast settings. The contrast
range is from 0 to 10.
i
NOTE:
To set value, you can also drag
the slider in the required field.
The
Figure 110: Rear View Camera
Screen
8.3 REVERSE PARK ASSIST
SYSTEM (RPAS)
To enter the RPAS feature perform the
following steps:
1. Engage the reverse gear of the
vehicle.
2. The system displays the RPAS
screen, if it is configured in the
vehicle.
Figure 111: RPAS Screen
89