Connection And Operating - FONESTAR FO-350 Instruction Manual

EN

CONNECTION AND OPERATING

- Connect the VGA and stereo audio signal sources to the corresponding inputs on the matrix.
- Then connect the VGA and stereo audio signal outputs to the screens, computer loudspeakers, etc.
- With the FO-350, power the equipment using the AC/DC adapter connecting it to the 5 V DC input and the
mains.
- With the FO-356, power the equipment using the AC power socket.
INSTRUCTIONS FOR USE
Once the equipment has been connected in accordance with the instructions in the CONNECTION section,
the input signals can be selected in two ways.
Manual selection: using the OUTPUT buttons on the front panel of the equipment, assign the desired input
for each output. If you want the equipment to work as a signal splitter, in other words 1 input to be split
among all the outputs, press the corresponding button to the desired input from the SPLITTER buttons.
Remote selection: press the corresponding button to assign the desired input to the chosen output. For more
information on the remote control, see the REMOTE CONTROL section.
- 6 -