Quick Installation Steps; Installing Thermostat - Rheem Comfort Control2 Installer's Manual

Quick Installation Steps


Determine location of thermostat installation.

Mount thermostat base to wall.

Connect wires to thermostat base.

Attach thermostat to base.

Turn on power to system. Allow approximately 1 minute for the system to configure.

Set the time

Select advanced installer menu settings or use USB upload feature to install
Thermostat Configuration information

Perform thermostat/system operation checkout.

Program thermostat or accept factory programming.

Touch to run schedule.

Installing thermostat


Carefully separate the thermostat body from the thermostat base.

Place base at installation location and mark mounting hole locations on wall using
base as a template.

Move base out of the way. Drill mounting holes.

Attach base snugly to wall using two mounting screws. Levelling is for appearance
only and will not affect thermostat operation.
Installer's Guide  5