Rheem Comfort Control2 Installer's Manual page 16

Communicating Devices:
This menu item will list each piece of system
equipment connected to the ClimateTalk network. The equipment can be selected
TM
and entered to view identifying information, operating information and setup status as
described in Equipment User Menus.
Fault Status:
This menu item lists current equipment fault conditions. The system
equipment experiencing the Fault will be listed with details of the fault. If no faults are
detected, this screen will show nothing.
USB Upload:
The USB load menu displays a list
of thermostat parameters that can be loaded to the
thermostat from a USB memory device. If the USB
port detects a USB memory device, this menu will
automatically display.
Contractors should link to www.Rheemote.net and
select: Departments/PTS/Thermostats.
In the USB Upload menu, select the item to upload and press to mark the item with
a red box. After all items to upload are selected, press the Upload button.
The USB media must have properly formatted information to be recognized by the
thermostat. If the thermostat does not find information, when the Upload button is
pressed, the display will indicate, "Invalid Data Found. Installation Failed!"
16  Installer's Guide