Sony Walkman NW-MS77DR Operating Instructions Manual page 16

Transferring audio files from the computer to your Network Walkman (continued)
4
Connect your Network Walkman to the computer.
1 Connect the AC power adaptor*.
Connect the supplied AC power adaptor to the DC IN jack on the USB cradle or the recording USB cradle, and
then to a wall outlet.
2 Connect the USB cradle or the recording USB cradle to the computer.
Connect the small connector of the dedicated USB cable into the USB jack on the USB cradle or the recording
USB cradle, and the large connector to a USB port on your computer.
NW-MS70D/MS90D
USB cradle
NW-MS77DR
Recording
USB cradle
to DC IN
3 Set the record select switch. (Only for NW-MS77DR)
Set the record select switch to "USB/KEY PROTECT."
16
to the USB jack
1
to DC IN
to the USB jack
1
* You can charge the battery without connecting the AC power
Record select switch
Dedicated USB
cable (supplied)
2
AC power adaptor*
Dedicated USB
cable (supplied)
2
AC power adaptor*
adaptor. Connect your Network Walkman and the computer (2).
From the menu, select "USB CHG: ON" (page 43) to enable
charging the battery with a computer. However, frequent use of
USB charge may increase the consumption of the computer's
built-in battery.
to the USB port
to
wall outlet
to the USB port
to
wall outlet