Checking The Remaining Time Or The Recording Position - Sony MZ-B50 Operating Instructions Manual

If you make a mistake while
setting the clock
Press xSTOP, and set the clock again
from step 1. You can skip a step by
pressing NPLAY.
To display the current time
When the recorder is not operating or
while recording, press DISPLAY
repeatedly until the current time appears
in the display.
To display the time in the 24-
hour system
While setting the clock, press XPAUSE.
To display the time in the 12-hour system,
press XPAUSE again.
20
-GB
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.
DISPLAY
1
Press DISPLAY while the recorder is
recording or stopped.
Each time you press the button, the
display changes as follows.
While recording
A
Track number
Track number
1)
Current date
1)
Appears only when the clock is set.
If you want to date and time stamp the
recording, set the clock in advance.
REC indicator
A
B
B
Elapsed time
Remaining time for
recording
1)
Current time