Locating A Specific Track - Sony MDS-S37 Operating Instructions Manual

Playing MDs
You can check the track name at any time while
playing an MD
Press SCROLL.
Since the display shows up to 12 characters at a time,
press SCROLL again to see the rest of the track title if
the title has 13 characters or more.
Press SCROLL again to pause scrolling, and again to
continue scrolling.

Locating a Specific Track

You can quickly locate any track while playing a disc
by using AMS (Automatic Music Sensor), = and
+, number buttons or M.SCAN on the remote.
·∏ p r
0 )
≠ AMS ±
To locate
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly
A specific track by
using AMS
By scanning each
track for 6 seconds
(music scan)
16
6
•
>25
·
· P p
=/+
r
= +
0 )
Do the following:
During playback, turn AMS clockwise
or press + repeatedly until you
find the track.
During playback, turn AMS
counterclockwise or press =
repeatedly until you find the track.
Press number buttons to enter the
track number.
1 Turn AMS until the track number
you want to locate appears while
the deck is stopped. (The track
number is flashing.)
2 Press AMS or fl.
1 Press M.SCAN before you start
playing.
2 When you find the track you want,
press · to start playing.
When you directly locate a track with a number over
25 Z
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter "0," press button 10.
Examples: • To play track number 30
• To play track number 100
You can extend the playing time during music scan
Z
While the deck is stopped, press M.SCAN repeatedly
until the playing time you want (6, 10 or 20 seconds)
appears in the display. Each press changes the time in
order of 6 to 20, then from 6 again.
To pause playing at the beginning of a track
Turn AMS (or press = or +) after pausing
playback.
Number
To go quickly to the beginning of the last track
buttons
Turn AMS counterclockwise (or press =) while the
display shows the total track number and total disc
M.SCAN
playing time, remaining recordable time of the disc, or
disc name (see page 15).
Press >25 once, then 3 and 10.
Press >25 twice, then 1, 10 and 10.