Dahua DH-HAC-HFW1200T-A User Manual page 25

Step 1 Confirm the position of screw holes (and the cable outlet hole if it needs to go through
the mounting surface④) and drill them on the mounting surface④, and then insert the
expansion bolts③ in the screw holes.
Step 2 Align the screw holes on the bracket to those on the mounting surface④, and then pull
the cable out through mounting surface or the side cable tray. Attach the bracket to the
mounting surface④ with the self-tapping screws②.
Step 3 Connect the device① to power source and the XVR device, and the live view screen is
displayed.
Step 4 Loosen the locking screws and aim the lens to the ideal angle, and then fasten them,
see Figure 3-27.
Figure 3-27 Model L adjustment
Installation 18