Advertisement
f
MODEL
CB500T
HONDA
STEP -49
Remove and discard
vinyl dust seal.
STEP -48
Thorough1Y clean front
brake
disc
using good
quality
degreasing agent.
Wipe with a
clean cloth.
STEP -47
Insert clevis pin and
secure with plain washer and cotter
pino
Spread cotter pin ends as shown.
(Right
foot peg shown, left peg
similar.)
STEP -51
Insert front ax1e from
speedometer gearbox side.
STEP -50
Install speedometer
gearbox,
making
sure lugs afe
aligned with slots in retainer.
STEP -52
Install axle collar onto
axle and into front wheel oil selli.
STEP -54
Kemove separator "y
removing strapo Remove two hex
bolts
securing inside brake parlo
Remove brake parlo
ò3 I ~F'
-;J;J
;:)crap~
ulr
alI
pr~-
servative
and residue from eachbrake
rado
Reinstall inside brakepad
and tighten to specified torque.
Torque specification: 300-
400kg-cm
(260- 345Ibs-in)
Advertisement
