Tub Clean - LG WD-N1213D6 Owner's Manual

H ow to use washer
Use this function to sanitize drum to remove
any bacteria and keep the drum clean.
1. Press the Power button.
• Close the door.
• Add the detergent or antibacterial
detergent to the container.
• Add the liquid chloride bleach to the liquid
detergent container or powder chloride
detergent to the detergent container for
main wash.
2. Press the "Tub Clean" Button.
• "Tub Clean" Course will be set and all
button are inoperable.
3. Press the "Start" button.
• The door will be locked and the Tub Clean
will start.
Powder detergent or bleach
54 g
Powder
bleach/detergent
• Do not add more than the designated amount
for the chloride bleach. If you add too much
chloride bleach, it may cause problems to the
washer.
24

Tub Clean

Liquid detergent or bleach
54 ml
Liquid bleach/
detergent
Liquid detergent/bleach
reference line (MAX)
• If you add more than the
reference line, it may be
directly added to the
laundry.
NOTE
Auto Tub clean notification function(
• When you turn on the power by pressing
the Power button, and the following sign is
shown on the panel, it means that you need
to clean the drum. Press the Tub Clean
button to clean the Tub.
• If you want to proceed with normal wash
course and not the Tub Clean, turn the
course selection dial or press the button of
the course and cycle you want.
• If you do not proceed with the Tub Clean,
this message will appear on the panel at
every 30 times.
• If you proceed with the Tub Clean, the
message will not appear until the next time
you need to clean the tub.
• Even though it may differ by the frequency
of use of the washer, the auto drum clean
notification generally appears once every
one to two months.
)