The Timer
Setting the clock
"--:--" indication appears in the display
until you set the clock.
Tip
The time display
system:
24-hour system
CLOCK
1
Press CLOCK for 2 seconds until the hour digit
flashes.
2
Press TUNING/TIME SET + or – until you set the
current hour. Then press DISPLAY•ENTER
MEMORY.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET + or – until the
correct minute is displayed.
3
Press DISPLAY•ENTER MEMORY.
The clock starts from 00 seconds.
DISPLAY
TUNING/
ENTER MEMORY
TIME SET +, –
/
21
EN
The Timer
Need help?
Do you have a question about the CFD-W57 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers