VOCO CELALUX 3 Directions For Use Manual page 5

Celalux 3 Curing Light • Operation at a Glance
9 Handpiece:
• Adjusting light angle
• Position light guide tip close
to material for optimal results
• Check light guide attachment,
• Check & clean both ends of
light guide for debris or other
obstructions,
• Check Handpiece window
10 Recharging Station:
• Battery on charging mount (2-steps)
• Do not replace on recharging station before cleaning & disinfection
• Use radiometer regularly to assure correct light output
• Check battery charge indicators
Recharging:
• Constant light = charging
• Light off = fully charged battery; ready to use
Radiometer:
• Green = OK
• Red = low output
7 a
Celalux 3 Curing Light • Operation at a Glance
11 Activation of Celalux 3: switch on handpiece
12
Light is activated for 20 seconds: depress switch on handpiece
13
Handpiece will vibrate and flash after 10 seconds
14 Light off at once: depress switch on handpiece
15 Light is off
10 sec
5